EN 10088-2 Stainless Steel Plate and Sheet

  • Grade: 1.4301, 1.4306, 1.4307, 1.4948, 1.4401, 1.4436, 1.4404, 1.4571, 1.4435, 1.4541, 1.4941, 1.4550, 1.4961, 1.4539, 1.4529, 1.4547, 1.4563, 1.4958, 1.4959, 1.4961, 1.4462, 1.4362, 1.4507, 1.4410, 1.4501
  • Width: 1000-2500mm
  • Length: 1000-12000mm
  • Thickness: 1-100mm

Features

EN 10088-2 Stainless Steel Plate and Sheet

Chemical Composition (wt.%)
Designation Chemical composition % by mass max unless stated
Steel Name Steel Number C Si Mn P S N Cr Mo Ni
Ferritic stainless steels – standard grades
X2CrNi12 1.4003 0.03 1 1.5 0.04 0.015 0.03 10.5/12.5 0.30/1.00
X2CrTi12 1.4512 0.03 1 1 0.04 0.015 10.5/12.5
X6CrNiTi12 1.4516 0.08 0.7 1.5 0.04 0.015 10.5/12.5 0.50/1.50
X6Cr13 1.4000 0.08 1 1 0.04 0.015 12.0/14.0
X6CrAl13 1.4002 0.08 1 1 0.04 0.015 12.0/14.0
X6Cr17 1.4016 0.08 1 1 0.04 0.015 16.0/18.0
X3CrTi17 1.4510 0.05 1 1 0.04 0.015 16.0/18.0
X3CrNb17 1.4511 0.05 1 1 0.04 0.015 16.0/18.0
X6CrMo17-1 1.4113 0.08 1 1 0.04 0.015 16.0/18.0 0.90/1.40
X2CrMoTi18-2 1.4521 0.025 1 1 0.04 0.015 0.03 17.0/20.0 1.80/2.50
Ferritic stainless steels – special grades
X2CrMnNiTi12 1.4600 0.03 1 1.00/2.50 0.04 0.015 0.025 11.0/13.0 0.30/1.00
X2CrSiTi15 1.4630 0.03 0.20/1.50 1 0.05 0.05 13.0/16.0 0.5 0.5
X2CrTi17 1.4520 0.025 0.5 0.5 0.04 0.015 0.015 16.0/18.0
X1CrNb15 1.4595 0.02 1 1 0.025 0.015 0.02 14.0/16.0 0.20/0.60
X2CrMoTi17-1 1.4513 0.025 1 1 0.04 0.015 0.015 16.0/18.0 0.80/1.40
X6CrNi17-1 1.4017 0.08 1 1 0.04 0.015 16.0/18.0 1.20/1.60
X5CrNiMoTi15-2 1.4589 0.08 1 1 0.04 0.015 13.5/15.5 0.20/1.20 1.00/2.50
X6CrMoNb17-1 1.4526 0.08 1 1 0.04 0.015 0.04 16.0/18.0 0.80/1.40
X2CrNbZr17 1.4590 0.03 1 1 0.04 0.015 16.0/17.5
X2CrTiNb18 1.4509 0.03 1 1 0.04 0.015 17.5/18.5
X2CrAlSiNb18 1.4634 0.03 0.20/1.50 1 0.05 0.05 17.5/18.5 0.5 0.5
X2CrNbTi20 1.4607 0.03 1 1 0.04 0.015 0.03 18.5/20.5
X2CrTi21 1.4611 0.03 1 1 0.05 0.05 19.0/22.0 0.5 0.5
X2CrNbCu21 1.4621 0.03 1 1 0.04 0.015 20.0/21.5
X2CrTi24 1.4613 0.03 1 1 0.05 0.05 22.0/25.0 0.5 0.5
X2CrMoTi29-4 1.4592 0.025 1 1 0.03 0.01 0.045 28.0/30.0 3.50/4.50
Martensitic stainless steels – standard grades
X12Cr13 1.4006 0.08/0.15 1 1.5 0.04 0.015 11.5/13.5 0.75
X15Cr13 1.4024 0.12/0.17 1 1 0.04 0.015 12.0/14.0
X20Cr13 1.4021 0.16/0.25 1 1.5 0.04 0.015 12.0/14.0
X30Cr13 1.4028 0.26/0.35 1 1.5 0.04 0.015 12.0/14.0
X39Cr13 1.4031 0.36/0.42 1 1 0.04 0.015 12.5/14.5
X46Cr13 1.4034 0.43/0.50 1 1 0.04 0.015 12.5/14.5
X38CrMo14 1.4419 0.36/0.42 1 1 0.04 0.015 13.0/14.5 0.60/1.00
X55CrMo14 1.4110 0.48/0.60 1 1 0.04 0.015 13.0/15.0 0.50/0.80
X50CrMoV15 1.4116 0.45/0.55 1 1 0.04 0.015 14.0/15.0 0.50/0.80
X39CrMo17-1 1.4122 0.33/0.45 1 1.5 0.04 0.015 15.5/17.5 0.80/1.30 1
X3CrNiMo13-4 1.4313 0.05 0.7 1.5 0.04 0.015 >0.020 12.0/14.0 0.30/0.70 3.5/4.5
X4CrNiMo16-5-1 1.4418 0.06 0.7 1.5 0.04 0.015 >0.020 15.0/17.0 0.80/1.50 4.0/6.0
Martensitic and precipitation-hardening steels – special grades
X1CrNiMoCu12-5-2 1.4422 0.02 0.5 2 0.04 0.003 0.02 11.0/13.0 1.30/1.80 4.0/5.0
X1CrNiMoCu12-7-3 1.4423 0.02 0.5 2 0.04 0.003 0.02 11.0/13.0 2.30/2.80 6.0/7.0
X5CrNiCuNb16-4 1.4542 0.07 0.7 1.5 0.04 0.015 15.0/17.0 0.6 3.0/5.0
X7CrNiAl17-7 1.4568 0.09 0.7 1 0.04 0.015 16.0/18.0 6.5/7.8
Austenitic stainless steels – standard grades
X10CrNi18-8 1.4310 0.05/0.15 2 2 0.045 0.015 0.11 16.0/19.0 0.8 6.0/9.5
X2CrNiN18-7 1.4318 0.03 1 2 0.045 0.015 0.10/0.20 16.5/18.5 6.0/8.0
X2CrNi18-9 1.4307 0.03 1 2 0.045 0.015 0.11 17.5/19.5 8.0/10.5
X2CrNi19-11 1.4306 0.03 1 2 0.045 0.015 0.11 18.0/20.0 10.0/12.0
X2CrNiN18-10 1.4311 0.03 1 2 0.045 0.015 0.12/0.22 17.5/19.5 8.5/11.5
X5CrNi18-10 1.4301 0.07 1 2 0.045 0.015 0.11 17.5/19.5 8.0/10.5
X8CrNiS18-9 1.4305 0.1 1 2 0.045 0.15/0.35 0.11 17.0/19.0 8.0/10.0
X6CrNiTi18-10 1.4541 0.08 1 2 0.045 0.015 17.0/19.0 9.0/12.0
X4CrNi18-12 1.4303 0.06 1 2 0.045 0.015 0.11 17.0/19.0 11.0/13.0
X2CrNiMo17-12-2 1.4404 0.03 1 2 0.045 0.015 0.11 16.5/18.5 2.00/2.50 10.0/13.0
X2CrNiMoN17-11-2 1.4406 0.03 1 2 0.045 0.015 0.12/0.22 16.5/18.5 2.00/2.50 10.0/12.0
X5CrNiMo17-12-2 1.4401 0.07 1 2 0.045 0.015 0.11 16.5/18.5 2.00/2.50 10.0/13.0
X6CrNiMoTi17-12-2 1.4571 0.08 1 2 0.045 0.015 16.5/18.5 2.00/2.50 10.5/13.5
X2CrNiMo17-12-3 1.4432 0.03 1 2 0.045 0.015 0.11 16.5/18.5 2.50/3.00 10.5/13.0
X2CrNiMo18-14-3 1.4435 0.03 1 2 0.045 0.015 0.11 17.0/19.0 2.50/3.00 12.5/15.0
X2CrNiMoN17-13-5 1.4439 0.03 1 2 0.045 0.015 0.12/0.22 16.5/18.5 4.0/5.0 12.5/14.5
X1NiCrMoCu25-20-5 1.4539 0.02 0.7 2 0.03 0.01 0.15 19.0/21.0 4.0/5.0 24.0/26.0
Austenitic stainless steels – special grades
X5CrNi17-7 1.4319 0.07 1 2 0.045 0.03 0.11 16.0/18.0 6.0/8.0
X5CrNiN19-9 1.4315 0.06 1 2 0.045 0.015 0.12/0.22 18.0/20.0 8.0/11.0
X5CrNiCu19-6-2 1.4640 0.030/0.08 0.5 1.50/4.0 0.045 0.015 0.03/0.11 18.0/19.0 5.5/6.9
X1CrNi25-21 1.4335 0.02 0.25 2 0.025 0.01 0.11 24.0/26.0 0.2 20.0/22.0
X6CrNiNb18-10 1.4550 0.08 1 2 0.045 0.015 17.0/19.0 9.0/12.0
X1CrNiMoN25-22-2 1.4466 0.02 0.7 2 0.025 0.01 0.10/0.16 24.0/26.0 2.00/2.50 21.0/23.0
X6CrNiMoNb17-12-2 1.4580 0.08 1 2 0.045 0.015 16.5/18.5 2.00/2.50 10.5/13.5
X2CrNiMoN17-3-3 1.4429 0.03 1 2 0.045 0.015 0.12/0.22 16.5/18.5 2.50/3.00 11.0/14.0
X3CrNiMo17-13-3 1.4436 0.05 1 2 0.045 0.015 0.11 16.5/18.5 2.50/3.00 10.5/13.0
X2CrNiMoN18-12-4 1.4434 0.03 1 2 0.045 0.015 0.10/0.20 16.5/19.5 3.0/4.0 10.5/14.0
X2CrNiMo18-15-4 1.4438 0.03 1 2 0.045 0.015 0.11 17.5/19.5 3.0/4.0 13.0/16.0
X1CrNiMoCuN24-22-8 1.4652 0.02 0.5 2.00/4.0 0.03 0.005 0.45/0.55 23.0/25.0 7.0/8.0 21.0/23.0
X1CrNiSi18-15-4 1.4361 0.015 3.7/4.5 2 0.025 0.01 0.11 16.5/18.5 0.2 14.0/16.0
X6CrMnNiCuN18-12-4-2 1.4646 0.02/0.10 1 10.5/12.5 0.05 0.015 0.20/0.30 17.0/19.0 3.5/4.5
X11CrNiMnN19-8-6 1.4369 0.07/0.15 0.50/1.00 5.0/7.5 0.03 0.015 0.20/0.30 17.5/19.5 6.5/8.5
X8CrMnNi19-6-3 1.4376 0.1 1 5.0/8.0 0.045 0.015 0.3 17.0/20.5 2.00/4.5
X12CrMnNiN17-7-5 1.4372 0.15 1 5.5/7.5 0.045 0.015 0.05/0.25 16.0/18.0 3.5/5.5
X2CrMnNiN17-7-5 1.4371 0.03 1 6.0/8.0 0.045 0.015 0.15/0.20 16.0/17.0 3.5/5.5
X9CrMnNiCu17-8-5-2 1.4618 0.1 1 5.5/9.5 0.07 0.01 0.15 16.5/18.5 4.5/5.5
X12CrMnNiN18-9-5 1.4373 0.15 1 7.5/10.5 0.045 0.015 0.05/0.25 17.0/19.0 4.0/6.0
X9CrMnCuNB17-8-3 1.4597 0.1 2 6.5/8.5 0.04 0.03 0.15/0.30 16.0/18.0 1 2
X1NiCrMo31-27-4 1.4563 0.02 0.7 2 0.03 0.01 0.11 26.0/28.0 3.0/4.0 30.0/32.0
X1CrNiMoCuN25-25-5 1.4537 0.02 0.7 2 0.03 0.01 0.17/0.25 24.0/26.0 4.7/5.7 24.0/27.0
X1CrNiMoCuN20-18-7 1.4547 0.02 0.7 1 0.03 0.01 0.18/0.25 19.5/20.5 6.0/7.0 17.5/18.5
X1CrNiMoCuNW24-22-6 1.4659 0.02 0.7 2.00/4.0 0.03 0.01 0.35/0.50 23.0/25.0 5.5/6.5 21.0/23.0
X1NiCrMoCuN25-20-7 1.4529 0.02 0.5 1 0.03 0.01 0.15/0.25 19.0/21.0 6.0/7.0 24.0/26.0
X2CrNiMnMoN25-18-6-5 1.4565 0.03 1 5.0/7.0 0.03 0.015 0.30/0.60 24.0/26.0 4.0/5.0 16.0/19.0
Austenitic-ferritic stainless steels-standard grades
X2CrNiN23-4 1.4362 0.03 1 2 0.035 0.015 0.05/0.20 22.0/24.0 0.10/0.60 3.5/5.5
X2CrNiMoN22-5-3 1.4462 0.03 1 2 0.035 0.015 0.10/0.22 21.0/23.0 2.50/3.50 4.5/6.5
Austenitic-ferritic stainless steels-special grades
X2CrNiN22-2 1.4062 0.03 1 2 0.04 0.01 0.16/0.28 21.5/24.0 0.45 1.00/2.90
X2CrNiCuN23-4 1.4655 0.03 1 2 0.035 0.015 0.05/0.20 22.0/24.0 0.10/0.60 3.5/5.5
X2CrMnNiN21-5-1 1.4162 0.04 1 4.0/6.0 0.04 0.015 0.20/0.25 21.0/22.0 0.10/0.80 1.35/1.90
X2CrMnNiMoN21-5-3 1.4482 0.03 1 4.0/6.0 0.035 0.03 0.05/0.20 19.5/21.5 0.10/0.60 1.50/3.50
X2CrNiMnMoCuN24-4-3-2 1.4662 0.03 0.7 2.50/4.0 0.035 0.005 0.20/0.30 23.0/25.0 1.00/2.00 3.0/4.5
X2CrNiMoN29-7-2 1.4477 0.03 0.5 0.80/1.50 0.03 0.015 0.30/0.40 28.0/30.0 1.50/2.60 5.8/7.5
X2CrNiMoCuN25-6-3 1.4507 0.03 0.7 2 0.035 0.015 0.20/0.30 24.0/26.0 3.0/4.0 6.0/8.0
X2CrNiMoN25-7-4 1.4410 0.03 1 2 0.035 0.015 0.24/0.35 24.0/26.0 3.0/4.5 6.0/8.0
X2CrNiMoCuWN25-7-4 1.4501 0.03 1 1 0.035 0.015 0.20/0.30 24.0/26.0 3.0/4.0 6.0/8.0
X2CrNiMoSi18-5-3 1.4424 0.03 1.40/2.00 1.20/2.00 0.035 0.015 0.05/0.10 18.0/19.0 2.50/3.0 4.5/5.2

Technical Specifications

Specification Value
Standard EN 10088-2 Stainless Steel Plate and Sheet
Grade 1.4301, 1.4306, 1.4307, 1.4948, 1.4401, 1.4436, 1.4404, 1.4571, 1.4435, 1.4541, 1.4941, 1.4550, 1.4961, 1.4539, 1.4529, 1.4547, 1.4563, 1.4958, 1.4959, 1.4961, 1.4462, 1.4362, 1.4507, 1.4410, 1.4501
Manufacturing Process Hot Rolled, Cold Rolled
Type Plate and Sheet
Dimension Thickness: 1-100mm
Width: 1000mm, 1219mm, 1250mm, 1500mm, 2000mm, 2200mm, 2500mm
Length: 1000mm, 2438mm, 3000mm, 6000mm, 12000mm
Other requirements Upon customer’s request or size availability
Delivery Condition Solution, pickling, straightening and trimming.
Inspection Certificate EN 10204 Type 3.1 (Mill Test Certificate), EN 10204 Type 3.2 (Witness Testing or 3rd Party Inspection)
Tests Chemical analysis, Tensile test, Intergranular corrosion test, Metallographic examination
Packing

Packed on plywood pallets.

Application

Architectural Components: Cladding, roofing, and interior design elements.
Food and Beverage Industry: Equipment and machinery for processing, handling, and storage.
Chemical and Pharmaceutical Industries: Tanks, reactors, and pipelines for handling corrosive substances.
Automotive and Aerospace: Structural components, exhaust systems, and decorative trims.
Medical Devices: Surgical instruments and medical equipment.

Get A Quote


    captcha